 Best Sellers
| | Home Skil SHD77M 15 Amp 7-1/4-Inch Mag Worm Drive Circular Saw | |
|  | |  | | | Skil SHD77M 15 Amp 7-1/4-Inch Mag Worm Drive Circular Saw | | | | | SKU:
2016798 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | 7-1/4" Magnesium Mag 77 Worm Drive Circular Saw, 15A, 4,600 RPM, Magnesium Motor & Gear Housings, Aircraft Quality Aluminum Foot, Skil Exclusive High Torque Distributed Wound Field, Precision Machined Worm Gears, Oil Pressure Relief Bellows Prevents Leaks, Skil Exclusive Oil Level Indicator, Blade Guard Automatically Retracts On A 45 Degree Angle, All Ball Bearing, Push Button Blade Lock, Diamond Arbor, Handy Depth Scale, Ruler Scale On Front Of Foot, Includes An 24 Tooth Carbide Blade & Saw Hook. | | | |
List Price:
| $360.21 | |
Our Price:
| $179.00
& this item ships for FREE with Super Saver Shipping.
| |
You Save:
| $181.21 (50%)
|
| | |
|
| | Product Promotions | | |
| | Product Details | | Product Length: | 7.75 inches | | Product Width: | 20.75 inches | | Product Height: | 9.0 inches | | Product Weight: | 17.2 pounds | | Package Length: | 20.4 inches | | Package Width: | 9.3 inches | | Package Height: | 7.9 inches | | Package Weight: | 17.2 pounds | | Average Customer Rating: |  based on 28 reviews |
| |
| | Features | The Skil SHD77M has-increased Performance - 15 ampsThe Skil SHD77M has an Upgraded Motor - High Temp WireThe Skil SHD77M comes with a 24-tooth carbide bladeThe Skil SHD77M has a Two Position Saw HookThe Skil SHD77M is Two-pounds Lighter
| |
| | Customer Reviews | Average Customer Review: ( 28 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
41 of 48 found the following review helpful:
The Pursuit of Happyness Aug 30, 2007
By Doctor Mark
"Cheap Scientist"
This is the son of the saw that built America, aka the Skilsaw. Notice that it's Skil and not Skill, and Happyness vs. Happiness. Today this saw has more variants than a 60's Corvette. The most recent upgrade includes a magnesium housing, aluminum foot, higher temperature motor wiring, and 2 more amps of current usage (hopefully translating into more power). Like many of you who don't own a worm drive Skilsaw, I was confused and am still confused about which one to buy. When in doubt, buy the most expensive model in the line. Ha ha. There are variants built out of steel, those with a removal cord, and even one that sits on wheels. This is not a joke. I saw one with an accessory plate that had 4 wheels on it. I ordered this just to have a saw that could ride atop concrete. The accessory was priced at $62, and is not offered by Amazon yet. Stay tuned. Anyway, the version of the SHD77M you should buy is the SHD77M-22. That version has a cloth bag. Now let's get to my evaluation of the saw. Power corrupts absolutely. There is no substitute for power. Once you get used to power, you don't want to go back. If you are cutting moist 2 x 12's or are building a deck with Ipe or Tiger Deck materials, a smooth and powerful saw is your only ticket. Another thing this saw does is score concrete. I use this term lightly because a 1/4" depth of cut is almost like scoring the material. That's Skil's recommendation, but you might want to plunge 1/2" with the right blade. Make sure it can take the rpm of this saw. They also recommend successive cuts, which I like to do just to keep the heat down. Okay, now that I have described the power and smooth sound you get out of this saw, let me get down to precision. First, the included carbide blade is disposable. The tips, when viewed closely, have chips on the side. But it cuts and it came with the saw, so use it until you have need of a better blade. Others have noted that the base plate is not exactly level. It bows in the middle looking front to back. You don't even need a precision level to see this, as it is off by around 1/32" or so. On a large flat surface, maybe 20% of the plate is resting on the wood. This might be a design or manufacturing issue. I could theorize how this could be good, as it reduces the friction/drag as you slide across wood. There is a saying in woodworking that you should measure twice and cut once. However, when you build a house, there are instances where you measure once and cut twice. The second cut is with the wood nailed in place. You want the saw to slide smoothly and not get snagged anywhere. A swirl or gouge on an edge can ruin the piece or pieces. So, I have to assume that Skil designed the plate based on a lot of hands-on experience. As for fit and finish, the plate is rugged (thick) but not a perfect rectangle or even a parallelogram. I tried using the left and right edges against a metal fence to determine which one gave a cut parallel to the fence. The right side won. Lefty was a little off (I'm picky). The amount of metal on each side is sufficient if you want to machine it square, but why bother? Out of the box, the blade cut at 90 degrees along the vertical. This is good, and should save you from having to shim the saw (you have to loosen some Torx screws to accomplish this). The two v-notched cutting guides are accurate, and acceptable for this type of tool. The handles are made of a plastic or composite. Since I did not subject this to a drop test, I can't vouch for their longevity. But plastic worries me. Too much plastic in a Bosch saw cheapened it. Luckily the two most stressed user adjustment points on the Skilsaw, the depth and miter screws/levers are both metal. Overall, I am pleased with this saw. It is not perfect, but then it does not cost as much as a Hilti. Nor was the Skilsaw designed for precision finish woodwork. That's what my table saw and miter saw are for. This is a carpenter's saw. I hope the new generation is as reliable as the old.
19 of 24 found the following review helpful:
 Skil saw warped base plate Sep 03, 2008
By Sepp Meier
My new Skil SHD77M arrived. I heard that there was a problem of the base plate not being flat, but assumed Skil had fixed that. Mine is way out of flat! The whole saw rocks as you place it on the work piece. So, back she goes. What a pain.
5 of 5 found the following review helpful:
 Finally got a decent circular saw Jul 31, 2008
By Joseph Bobst
After too many years of unsatisfactory results with yellow and gray sidewinder circular saws, I decided I deserved a good worm drive saw. All the reviews of the Skilsaw were pretty positive, and I liked the idea that Bosch had continued making such an old design with limited changes. First use was a revelation, As many have noted, the saw tracks very well, and following a line is no longer a WAG as with a sidewinder. Some other handy features are the depth markings on the shoe adjuster, the folding hanger hook, and even the sole plate has been thoughtfully dimensioned to 1 1/2" on one side of the blade and 3 1/2" on the other. Can you say, "Standard 2 x 4 size"?
In spite of light alloy usage, this a heavy machine. I suppose the weight is something of an advantage as the power output is substantial. It amazes me to see videos of pros using this tool with one hand on framing jobs at scary heights. All in all, a good product, good enough that finding one on eBay for much below market doesn't happen very often.
jb
19 of 25 found the following review helpful:
Do Not Buy This Saw Jun 18, 2009
By sbextra3
I purchase all of my tools (way too many if you ask my wife) from Amazon and very rarely, because I read all of the user reviews, am I disappointed. In this case I didn't listen to the one reviewer who found the problem with the base plate wobble. After a number of hours trying to figure out why I kept failing to get "square" cuts I finally figured out it was this miserable saw. The plate has a heavy 1/16th to 1/8th play that can't be tightened away. It's how the pin that holds the plate is machined.
Thankfully, Amazon stood by this defective product and accepted the return.
I too always go by the user reviews but BEWARE this time, the 4 to 5 star review is deceiving. If you get one of these defective saws you'll be very very frustrated. I'd get something else until Skill fixes this design problem.
4 of 4 found the following review helpful:
Not so pleased Oct 29, 2011
By ConstructionTech
Not so pleased. Here's why:
1. blade guard lever is too small and I am inclined to accidentally grab for the depth adjustment lever due to its size and proximity to the blade guard lever
2. quick release levers for bevel and depth adjustments are flimsy stamped steel and cumbersome to operate
3. bevel and depth adjustments are difficult, stick, and are not smooth
4. cooling fan inside motor housing broke loose before the saw was a month old, now the saw is not operable.
This is a worm drive saw, patented by skill almost 100 years ago. I don't think the design has been updated in 100 years and it shows in the clumsy features of this saw!
Try another brand, not this imported imitation.
See all 28 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ...
|
