 Best Sellers
| | Home Makita BDF451 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit | |
|  | |  | | | Makita BDF451 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit | | | | | SKU:
2611-4603 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | We've come a long way from sweat and a screwdriver. A hundred years ago, builders would never have envisioned a tool as powerful and efficient as this one. Heck, even 20 years ago. Science has ushered battery technology along, and the LXT lithium-ion system that powers this impact driver has a ton of advantages over standard NiMH or NiCad batteries. The lithium-ion technology means 1,400 battery life cycles, longer run time, lighter weight, a great reduction in the self-discharge rate and built-in shock-absorbing features to protect your battery. But perhaps the coolest innovation is what Makita calls its 45-minute optimum charger. It actually talks to the batteries it charges throughout the cycle, using a built-in memory chip in the battery and, believe it or not, a CPU chip in the charger itself, which analyzes the data stored in the battery chip to decide on the best charging method at that time. The drill/driver itself is fairly compact and lightweight, weighing in at less than 5 pounds, yet it's packing a powerful 560 in./lbs. of torque. It's got a super speed range of 0 to 300 rpm in low gear, 0 to 600 in mid-range and 0 to 1,700 rpm in top gear. Sometimes, you may encounter a little resistance if you're switching directly from low gear to high; if that happens, running the tool in mid-gear for a couple seconds completely alleviates any snag. Makita's always made ergonomically positive tools that feel good in your hand and take the strain off your body, and this one's no exception. The slightly curved grip is so comfortable, and the auxiliary handle gives you supreme control. And because it's super compact and lightweight, this driver's an absolute pleasure to work with, even overhead. --Kris Jensen-Van Heste What's in the Box
Drill/driver, two LXT lithium-ion 3.0Ah batteries, 45-minute optimum charger, screwdriver bits, carrying case | | | |
List Price:
| $538.00 | |
Our Price:
| To see price, add to cart.
& eligible for FREE Super Saver Shipping on orders over $25.
| |
You Save:
| |
| | |
|
| | Product Details | | Product Length: | 18.0 inches | | Product Width: | 16.7 inches | | Product Height: | 5.0 inches | | Product Weight: | 15.0 pounds | | Package Length: | 18.74 inches | | Package Width: | 16.0 inches | | Package Height: | 5.43 inches | | Package Weight: | 15.0 pounds | | Average Customer Rating: |  based on 19 reviews |
| |
| | Features | 4-pole motor delivers 560 in.lbs. of max torque, with a variable 3-speed all metal transmission (0-300 / 0-600 / 0-1, 700 RPM)Compact, ergonomic design, 9-3/8 inches long and weighs just 4.6 poundsShift-Lock drive system quickly shifts between modes, 2 built-in LED lights, rugged tool belt clipLXT lithium-ion battery, Energy Star30-minute rapid optimum charger produces 430% total lifetime work, 2.5X more cycles3-year warranty on tool, 1-year warranty on battery and charger
| |
| | Customer Reviews | Average Customer Review: ( 19 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
24 of 24 found the following review helpful:
 Best ever used Aug 21, 2006
By 76Ram
Over the years i have used nearly every brand of cordless tool imaginable. There has always been advantages and disadvantages to each. Not with the Makita LXT line though. I own the Drill/Driver and the impact driver and each is everything advertised. They are lighter than other 18v models. They are tough, the battery charge lasts at least twice as long as any I have ever used and four times longer than the craftsman I upgraded from. If you can swallow the price, buy this tool it is worth every penny.
18 of 20 found the following review helpful:
Lightweight, NOT a "Hammerdrill", Really paying for lithium. Nov 13, 2007
By K. D. Lyon
I have used Craftsman, Ryobi, DeWalt and Makita from 7-18 volts. Makita has again produced a tough, handy design.
But somehow the Amazon product description slipped on the features. Makita specs for the BDF451 show NO hammer on this drill. Unlike the drill, the lithium packs are warranted for only 1 year. Standard issue.
Compared to my old 18 volt DeWalt XRP hammerdrill/driver (which is not balanced and won't stand on its battery) this drill does not pump my forearm like Popeye's after about half an hour.
I wish I could say it outperforms the DeWalt in every way. I expected more torque. Spoiled, I guess.
But, the lithium ion charges last about 1.5 times longer than the 18v nicad in my experience.(XRP was usefull to 3/4 hour of #10 deck fasteners) I dig the lithium charging: you can pull it off before the "45 minute" full charge, without lobotomizing your battery. Also cool: The packs HOLD charge phenominally well; so I can rely on ready stand-by. Ace in the hole.
Bottom line: Light and handy. Short of gasoline fired, you wont find better charge storage, but I find the BDF451 kind of spendy for middling torque. $279.00 shipped.
18 of 21 found the following review helpful:
Good overall, a couple of points to note May 12, 2007
By WG
First, let me say that, overall, I like this drill (although I haven't used it that much yet). It's fast, runs long on one charge, and is comfortable. I also really like the chuck - you can tighten and loosen it with one hand without a key and without running the drill. This is very convenient. The storage compartment on the case is nice too. I have a few negative points to make, though:
1. This drill has no hammer mode (Amazon's description says,"Shift Lock Driver System quickly shifts from 'hammer drill' to 'driver' mode with one touch") I can't find this feature and it's not mentioned in the manual. There is a switch to change from drill mode (max torque) to torque limited mode (for driving screws). That's nice, but it isn't a hammer drill.
2. The light is nice, but it really doesn't point right on the spot your're working on, so it's not as good as it could be.
3. The torque limiting is limited at the low end. In other words, even at the lowest setting, you can still over-drive small screws pretty easily.
4. The switch for changing the speeds gets stuck (although the Amazon ad and the manual say this is normal). You need to spin the motor a little and try a few times sometimes to get it to shift. Not a big deal, but a little annoying.
These are all pretty small points (unless you really want a hammer drill!), so overall, I'm pretty happy with this product.
8 of 8 found the following review helpful:
Have used for two months now... Apr 11, 2008
By jg
I have a small home improvement business and needed a replacement for my aging (and battery eating) Dewalt 18v Ni-Cad drill.
Overall i am pretty pleased with this unit. It is very light, compact, powerful and has the basics onboard...like a drive tip clip, a belt loop, and lights. This is my first Lithium Ion tool and i am amazed mainly at how fast the batteries recharge. And I get a full day out of the two batteries in this kit as opposed to the Dewalt which would go through at least three before they ran down. To a point that i had to keep a Dewalt charger in the truck to keep me going. The Makitas will go all day and dont need to be charged until i get home at night.
I prefer this drill over the hammer drill version as it is a tad lighter and smaller (the chuck is a little shorter). I keep a hammer drill in the truck and had no need for duplication ...for something i only need 3-4 times a month.
Folks seem to automatically buy the hammer version but look at the size and weight before you do it. That little bit makes a difference when you are slinging these things around all day. And compared to the Dewalt? Wow...it's sooo much lighter.
I tested a new 18v Milwaukee Lithium-Ion drill. The thing is a beast and is a pleasure to use but the size and weight of that thing is bigger than the Dewalt. No thanks. It is not worth it.
As far as the drill operation itself. It is almost perfect. Some have complained about the speed switch getting stuck at the top which has happened to me maybe 4 times in two months of daily use. Who cares.
The Dewalt did the same thing on occasion. I had two of them and they both did it.
The power is rated very high (torque) and have had only a couple of occasions where it bogged driving 4" screws. Strangely, the Dewalt, which is rated lower, drove the screws the rest of the way. I might have had the torque/speed setting wrong on the Makita ...who knows.
Overall...i would recommend it to anyone...homeowner or contractor.
6 of 6 found the following review helpful:
Transmission Problems Mar 17, 2010
By S. Sooter
"GadgetGuy"
I have used three of the Makita BDF451s in my home furniture and cabinet business for three years now, and they are great drills to use. Just need to be a little tougher. I used to own a commercial cabinet shop and must have heavy-duty tools, as I demand a lot from them. I concur with what others have said about power, balance, the very helpful light, quick charge time, etc. But now, two of the three drills have developed transmission problems. The problem starts with 3rd gear (gears slipping, popping out of gear). Eventually, all gears are affected. The motors run just as powerfully as the day I bought them, and battery endurance is likewise still great. But the drills make horrible gear grinding sounds now, and power no longer gets to the chuck. I would give 5 stars if Makita made a tougher transmission.
See all 19 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ...
|
