 Best Sellers
| | Home Incra BNDRUL12 12-Inch Incra Precision Bend Rule | |
|  | |  | | | Incra BNDRUL12 12-Inch Incra Precision Bend Rule | | | | | SKU:
BNDRUL12 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | INCRA Bend Rules make dual-surface layouts a snap using the corner slots shown above.
The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. We've put micro-fine marking holes at every scale line to instantly locate your sharp pencil point or scribe exactly on target with zero undertainty and no eye strain! The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing precision parallel lines relative to the edge of your work.
INCRA Bend Rules also provide zero-parallax measuring on any flat surface.
This is the 12" INCRA Bend Rule. It's also available in 6".
Bend rules are also available in Incra Rule Sets. (IRSET12) | | | |
List Price:
| $22.82 | |
Our Price:
| $17.50
& eligible for FREE Super Saver Shipping on orders over $25.
| |
You Save:
| $5.32 (23%)
|
| | |
|
| | Product Details | | Package Length: | 13.56 inches | | Package Width: | 2.7 inches | | Package Height: | 1.0 inches | | Package Weight: | 0.1 pounds | | Average Customer Rating: |  based on 4 reviews |
| |
| | Features | Measure on the top, edge and corners simultaneouslyMicro-fine marking holes and slots at every 1/16-, 1/32- and 1/64-inchInstantly locate a sharp pencil point or scribe where neededAllows for marking position with zero uncertainty, zero parallax, and zero eye strain90 degree shape holds it snugly in place, ultra thin for ultra precision
| |
| | Customer Reviews | Average Customer Review: ( 4 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
12 of 13 found the following review helpful:
 Like ALL Incra rules... this one is PERFECT! May 04, 2009
By Frank E. Trinkle
If you haven't yet used an Incra Rule of one sort or the other, you are missing out on exceptional precision and well thought-out manufacturing. The Bend Rule is one of many different Incra Rules that meet specific requirements. This one is for precise measuring and marking along a 90-degree edge. Also available in 6-inch and 18-inch (both of which I own).
Quality is very high, and though on first look, the rules seem a little flexible, that is by design. The premium paid in the pricing of these rules is a little steep, but in my opinion, well worth it in spades.
An Incra 5mm mechanical pencil is included with each rule, and more of these precision marking pencils are available both on Amazon and elsewhere.
STRONG Recommendation!
8 of 9 found the following review helpful:
AMAZINGLY accurate Feb 01, 2010
By A Mom
Search YouTube for videos of how Incra measuring tools work. It's a lot easier to see and understand that way.
Great ruler, almost perfect May 19, 2011
By Luke A. Jones
"Luke"
I bought this for my neighbor who is a little obsessive about being percise. He loves this ruler and uses it all the time. The only down side is, you have it be careful with it. Because of how thin it is and all the holes in it, it is easy to bend and throw off.
1 of 5 found the following review helpful:
 Initially puzzled but later satisfied! Jun 25, 2011
By Tae Hyun Baek
I was impressed with the idea of a bend rule and, thus, ordered one. But I
received a flat one instead from Amazon. However, the Incra packaging is saying
that it is a 12" precision bend rule and shows such a photo! (I expected a bend
rule to be in 'L' shape with 90 degree angle.)
So I thought if I put some pressure then the rule bends easily in the middle
at 90 degree. When I did, it got bent but the end result was far from
satisfactory. I do not think such a bend rule should be bent by customers.
Unless I received a wrong bend rule by mistake, I do not recommend this rule
to anyone.
PS: I checked the rule once again carefully and found that what I received is
not the 12" bend rule but '12-Inch Incra Marking Rule'. I am not sure how a
marking rule is put inside a bend rule packaging. I sent an e-mail to Incra and
will let you know what happended when I hear from Incra.
PS #2: When I sent a complaint e-mail to Incra, I got a reply saying that Incra
will send me a bend rule as a replacement for free. I received it today. In addition,
Incra also sent me a metric version of Incra T-rule. What I originailly bought together
with the bend rule was an inch-based imperil T-rule which is almost useless for those
using metric measurement system like me.
I appreciate Incra customer support team's efforts and I am sure that I will use both
of them a lot! And that is why I change the star rating from one to five.
PS #3: I found that I rarely use this bend rule although I use Incra T-rule almost
everyday. That is the reason why I changed my star rating from five to three.
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ...
|
