 Best Sellers
| | Home Hitachi M12V2 15 amp 3-1/4-Horsepower Plunge Base Variable Speed Plunge Router with 1/4-inch and 1/2-inch Collets | |
|  | |  | | | Hitachi M12V2 15 amp 3-1/4-Horsepower Plunge Base Variable Speed Plunge Router with 1/4-inch and 1/2-inch Collets | | | | | SKU:
933900 | | In Stock | | Availability:
Usually ships in 1 business days | | | | | | Includes: Straight Guide - 956797, Centering Gauge - 325233, Dust Adapter - 325215, Guide Bar - 325216, Wing Bolt - 301806, Wrench - 323293, 1/4" Collet - 323293, 1/2" Collet - 301795.
Easily converts to table use. Bits can be easily changed from a table mounting as the collet chuck is designed to protrude 6mm from the upper side of the table. Equipped with an improved collet chuck that secures the bit into the armature shaft for maximum hold. Dust guide diverts dust and debris away from the work piece and user. Weighs 13.9 lbs making it safe and stable for freehand routing. Ergonomic design for enhanced comfort and control. Elastomer covers the handles to reduce transfer of vibration and prevent slippage. Amps: 15. Horsepower: 3-1/4 HP. No Load Speed: 8,000 - 22,000 RPM. Collet Diameter: 1/2", 1/4". Plunge Stroke: 2-9/16". Tool Weight: 13.9 lbs. | | | |
List Price:
| $397.78 | |
Our Price:
| $204.00
& this item ships for FREE with Super Saver Shipping.
| |
You Save:
| $193.78 (49%)
|
| | |
|
| | Product Details | | Product Length: | 11.0 inches | | Product Width: | 9.0 inches | | Product Height: | 12.0 inches | | Product Weight: | 0.0 pounds | | Package Length: | 13.4 inches | | Package Width: | 12.5 inches | | Package Height: | 10.3 inches | | Package Weight: | 21.2 pounds | | Average Customer Rating: |  based on 53 reviews |
| |
| | Features | Powerful 3-1/4 peak-horsepower variable speed plunge routerVariable speed dial produces 8,000 to 22,000 RPMs for a wide range of cutting optionsAluminum fan of armature; soft-grip handleIncludes router, straight guide, centering-gauge, dust adapter, guide bar, wing bolt, wrench, and collets (1/4 and 1/2-inch)13.9-pounds; 5-year warranty
| |
| | Customer Reviews | Average Customer Review: ( 53 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
25 of 25 found the following review helpful:
 Great router, so far Jan 09, 2007
By Patrick T. Robinson
"Patrick Robinson"
I bought this router as an upgrade from a crappy, underpowered Craftsman 1/4" router that I had for years. That thing was so bad that it turned me off from using routers, and I hardly touched it for years. It was underpowered, wouldn't hold a bit, and screamed like a banchee even under light cuts.
Now that I have this new M12V2 I love routing again! It's awesome.
High Points:
Power: This thing is powerful! I just ordered some panel raising bits and have no doubt this will drive those very well. I will try to get back in here and give an update after some experience with these big bits. I has powered through 3/4" cuts easily (even when I tried to hog too much)
Plunge: Smooth as silk!
Speed control: Having it on the handle is really, really nice. It is right under your right thumb. I use it for every startup and shutdown. It gives you a reall feel of control.
Table mount: Mounted easily, and height control is easy with the standard height adjustment knob.
Low Points:
Size: This thing is BIG and heavy. You will probably want to have a smaller router as well to complement this router.
Collet: So far I have been having trouble getting bits into and out of the collet. Hopefully this will wear in and get easier. I will try to do an update after a couple of months.
Overall I am thrilled.
Patrick Robinson
Washington Woodworker
Update: I have had this router for 6 months now and still love it. The collet has loosened up nicely and bits come out easily. You need to make sure that the collet is snapped together when you put the bits in place, or they will be hard to remove. It has a ton of power. I have been driving large bits and it just plows through hard woods. It works great in my router table!
20 of 20 found the following review helpful:
Hitachi M12V2 review Feb 08, 2007
By RT
"nail bender"
I was needing a router to be used with a ProMax Cast Iron Table. I looked at several routers before deciding on this one. I saw the tool had a very good warranty, but questioned the low price. However, this is one deal where quality, power and design are excellant. Also did not have to buy anything extra for fine tuning, i.e. a router lift. After using it for a while I find only one minor issue. The collet likes to hug the bit. I have several other routers, including Bosch, Milwaukee an old Black and Decker and etc. Their power ranges from 3/4 hp to 3 1/4. They are all good tools and do what they were built for. However, the Hitachi will clearly hold it's own with my other routers. Won't waste time thinking if I need another router.
12 of 12 found the following review helpful:
Excellent router Jan 30, 2007
By C. Young
"C. Young"
I was looking for a large, powerful router for woodworking to replace an old router I own. This one has performed beyond my expectations. It is much larger in size than I imagined, but all the controls, clamps, adjustments, etc. were thought out and executed so well, that its size hasn't been an issue at all.
8 of 8 found the following review helpful:
Works great, hidden above table height adjustment Dec 19, 2008
By S. Brewster
My wife bought the router for me 2 years ago for christmas. I got it as a dedicated router for a router table cabinet I was adding to my table saw. Prior to receiving the router I fretted about whether or not to add a router lift and finally decided to wait and see how much of a hastle it would be to deal with under the table adjustment given the cost of most router lifts. As I removed the sub-base to attach the router to the table insert, I noticed a lock nut on the bottom of the height adjustment shaft. I turned the nut using a socket wrench (sorry, don't remember what size) and it seemed to turn the height adjustment shaft easily. I figured I had nothing to lose, so drilled a hole in the phenolic router table insert large enough to slip the socket through to make above the table adjustments. I've been using this router regularly for the past two years and the height adjustment using this method has always performed flawlessly, and it didn't cost me a thing. I've never used this router other than in my router table, so I can't comment on some of the problems others have encounterted. But if you're looking for a work-horse for your router table, I would give this one my highest recommendation.
10 of 11 found the following review helpful:
quality product Feb 18, 2007
By Anthony J. Miles
I bought 3 hitachi units for my router table for producing stile / rail / and door cutter on the same table and this unit exceeds my expentations !
the original router I recieved was not working properly on the cam lock for the plunger on the router , I EMAILED AMAZON AND THE REPLACED IT RIGHT AWAY, NO PROBLEM! AMAZON STANDS BEHIND THEIR PRODUCTS !
See all 53 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ...
|
