 Best Sellers
| | Home Bostitch SX150K-1 18 Gauge 1/2-Inch to 1-1/2-Inch Narrow Crown Stapler | |
|  | |  | | | Bostitch SX150K-1 18 Gauge 1/2-Inch to 1-1/2-Inch Narrow Crown Stapler | | | | | SKU:
996963 | | In Stock | | Availability:
Usually ships in 1-2 business days | | Only 1 left in stock, order soon! | | | | | | 1/2" - 1-1/2" Narrow Crown Stapler Kit, Consists Of: Stapler, 1/4" Fitting, 1000 1" Staples and Carrying Case, Tool Uses Bostitch SX5035 Series Staples, Magnesium Housing For Durability, 2.5 LB Ultra Light, Rear Exhaust, Adjustable Depth Control, Oilless Operation, Made In The USA. | | | |
List Price:
| $183.10 | |
Our Price:
| $99.00 | |
You Save:
| $84.10 (46%)
|
| | |
|
| | Product Details | | Product Weight: | 5.5 pounds | | Package Length: | 14.7 inches | | Package Width: | 13.2 inches | | Package Height: | 3.7 inches | | Package Weight: | 6.2 pounds | | Average Customer Rating: |  based on 20 reviews |
| |
| | Features | Oil freeLightweight magnesium housingUltra quiet rear exhaustAdjustable depth controlNo mar tip
| |
| | Customer Reviews | Average Customer Review: ( 20 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
25 of 26 found the following review helpful:
 So far so good May 18, 2004
By Gary D. McMullen
My old narrow crown went down the other day so I bought this at a home improvement warehouse. I usually check to see which is made in the USA first, then durability, then price. This was the only gun in it's price range made in the USA. I use it in case openings, drawerstock and drawer bottoms, built-in backs, or anything thin. (...) Depth of drive adjustment is good, rear exhaust is great,I have always hated the "blow in your face," weight is good, also no oil is a blessing ... no mar. It is so light it feels like plastic, but it is magnesium. I liked the automatic feature..as long as the safety is down, it will fire till you run out of stock. I wish it wouldn't fire without staples though..If I could I would deduct a half star for that. It had the power to consistantly sink 1" staples, but don't know about 1 1/2". It took more than a thousand staples without a hitch building columns...no pretzels. so far so good
15 of 16 found the following review helpful:
Leaky Tool, but they fixed it Jan 22, 2003
By Joseph Watson
"jwneflim"
I've just purchase my second SX150K from my local Home improvement store only to find it is leaking air from the trigger assembly, right out of the box. I had to return the first one because it was doing the same thing. Also out of the 30 or so staples I shot, 8 were double fires. I just got off the phone with Bostitch customer support and they wanted me to narrow it down to 1 of 3 seals it could have been. No thanks. As soon as I'm done writing this review I'm returning this one also...Update.
I just retured from a Bostitch SWAT event, they were unable to repair my leaking tool so they sent me home with a brand new one. That is great customer service.
I own 4 other Bostitch air tools with no problems at all.
9 of 10 found the following review helpful:
Welcome Addition Apr 09, 2003
This stapler was an istant hit in my High School cabinet shop. I teach cabinet making in a public high school,two years ago I purchased a small pnuematic set up (two finish nailers and a small two tank compressor). With a limited budget, I had to put off getting a stapler. I knew I needed one that was easy to change staples and sizes, included a case and could withstand the type of punishment and abuse only a high school student can dish out. It also had to take the standard narrow crown type staples. I recently purchased this one for my self and brought it in to school just to see how my students would take to it. It was instantly the tool of choice when attaching the 1/4" cabinet back or draw bottoms. If I happen to bring it home, the next day some student will ask for it. I was recently told to spend about $$$, a gift from the theater dept. for building some sets. I immediatly showed them the specs on this one, I'm expecting it soon then I'll finally get to take mine home.
8 of 9 found the following review helpful:
 Needs improvement Mar 20, 2005
By Big Krawl
This product has worked quite well for me, but a key feature broke, making is almost obsolete. I had to staple hail screen (hardware cloth) to a wooden frame. This required placing the safety mechanism (at the tip) on the screen and firing a staple. When the tip was wide it was not difficult. However, the tip is PLASTIC and it wore through after about 20 hours of work. The metal is very narrow, and was difficult to place on the screen to fire a staple. Consider selecting a stapler that has an all metal safety tip. This part is available from the Stanley/Bostitch website for $0.15, but shipping is $7.00!!!
8 of 9 found the following review helpful:
light, well finish and Oil free Mar 28, 2003
By Racing Mike
"mike_cbr929"
I've bought it a few days ago, so far very good felling about it. It feels very light, no wind blast in the face, wherever and however you use it...the rear exhaust is push to the oposite way, a very good thing...then no needs to rotate an exhaust like my PC brad nailer :-)Only complain, since it is an industrial model, there is no reset when fire...so you need to be very carefull to hold it secur againt the surface to avoid risk of a double fire....but some folks might like this feature...
See all 20 customer reviews on Amazon.com
| |
| |
| |  | |  |
|
Recently Viewed | You may also like ...
|
